Trojan Batten T50
- The primary building blocks of our truss system is ¢Ù C-Section ¢Ú Batten .
- The type of building, roof pitch, roof length, wind load and rain density are some of the deciding factors determining the design of our roof truss system.
D = depth , t = thickness (TCT) , b1 = top flange , b2 = base flange , s = lips
Section Type |
D (mm) |
t (mm) |
b1 (mm) |
b2 (mm) |
s (mm) |
Area (Ag) |
Weight (kg/m) |
Ix (mm⁴) |
Iy (mm⁴) |
rx (cm) |
rx (cm) |
Zx (mmᶟ) |
Zy (mmᶟ) |
|
1 | V50 - 0.45mm | 50 | 0.45 | 25 | 75 | 11 | 68.85 | 0.67 | 21050 | 27078 | 1.748 | 1.983 | 714 | 1062 |
Product Tolerances
Fort Steel light weight trusses are produced within the following tolerances :
Length | Web (Dim.H) | Flange (Dim.B) | Thickness |
± 5mm | ±1mm | ± 2mm | ± 0.05mm |
Longitudinal Tensile | Tensile Strength | Yield Strength | Protective Coating |
G550 | Min 550 Mpa | Min 550 Mpa | T-Maz™ |
Standard Coating Mass | Surface Finish | Surface Colour | |
Y12 | Non-spangled | Oak |