JC96
JC96 JC Type C-Section Truss Component : C-Section & Batten Johor Bahru (JB), Malaysia, Tebrau Manufacturer, Maker, Supplier, Supply | Fort Steel Sdn Bhd
  • The primary building blocks of our truss system is  ¢Ù C-Section ¢Ú Batten .
  • The type of building, roof pitch, roof length, wind load and rain density are some of the deciding factors determining the design of our roof truss system.

D = depth , t = thickness (TCT) , b1 = top flange , b2 = base flange , s = lips

Section Type D D
(mm)
t
(mm)
b1
(mm)
b2
(mm)
s
(mm)
Area
(Ag in mm²)
Weight
(Kg/m)
Ix
(mm⁴)
Iy
(mm⁴)
rx
(cm)
ry
(cm)
Zx
(mmᶟ)
Zy
(mmᶟ)
1 JC96 x 35 x 0.80mm 96 0.80 37.4 35.2 7.0 142.9 1.17 194355 20523 3.753 1.219 4049 801
2 JC96 x 35 x 1.00mm 96 1.00 37.4 35.2 7.0 171.71 1.49 240529 25147 3.743 1.210 5011 982


Product Tolerances

Fort Steel light weight trusses are produced within the following tolerances :

Length Web (Dim.H) Flange (Dim.B) Thickness
± 5mm ±1mm ± 2mm ± 0.05mm
Longitudinal Tensile Tensile Strength Yield Strength Protective Coating
G550 Min 550 Mpa Min 550 Mpa T-Maz™
Standard Coating Mass Surface Finish Surface Colour  
Y12 Non-spangled Oak  

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version