EC63
EC63 EC Type C-Section Truss Component : C-Section & Batten Johor Bahru (JB), Malaysia, Tebrau Manufacturer, Maker, Supplier, Supply | Fort Steel Sdn Bhd
  • The primary building blocks of our truss system is   C-Section  Batten .
  • The type of building, roof pitch, roof length, wind load and rain density are some of the deciding factors determining the design of our roof truss system.

D = depth , t = thickness (TCT) , b1 = top flange , b2 = base flange , s = lips

Section Type B D
(mm)
t
(mm)
b1
(mm)
b2
(mm)
s
(mm)
Area
(Ag in mm²)
Weight
(Kg/m)
Ix
(mm⁴)
Iy
(mm⁴)
rx
(cm)
ry
(cm)
Zx
(mmᶟ)
Zy
(mmᶟ)
1 EC63 x 26 x 0.75mm 63 0.75 27.2 25.5 6.0 92.9 0.77 56171 7821 2.490 0.929 1783 427
2 EC63 x 26 x 0.80mm 63 0.80 27.2 25.5 6.0 98.9 0.82 59668 8281 2.488 0.927 1894 452


Product Tolerances

Fort Steel light weight trusses are produced within the following tolerances :
Length Web (Dim.H) Flange (Dim.B) Thickness
± 5mm ±1mm ± 2mm ± 0.05mm
Longitudinal Tensile Tensile Strength Yield Strength Protective Coating
G550 Min 550 Mpa Min 550 Mpa T-Maz™
Standard Coating Mass Surface Finish Surface Colour  
Y12 Non-spangled Oak  

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version